Cubicon Style NEO-A22C
77.860.000 ₫
1 in stock
Với khổ in 220 x 220 x 220 mm, Style NEO-A22C mang đến sự cân bằng giữa không gian làm việc và các tính năng cao cấp. Máy sử dụng bàn in nhiệt phủ đặc biệt, bộ lọc khí HEPA (Triple Clean Filter) giúp loại bỏ bụi và mùi, hỗ trợ nhiều loại vật liệu và các tùy chọn kết nối mạng. Style NEO-A22C phù hợp cho các văn phòng thiết kế, cơ sở giáo dục cần một máy in 3D đáng tin cậy, dễ vận hành với chất lượng in ổn định.
Most output problems can be easily maintained by simply replacing the nozzle kit fitted to the Extruder, so it is designed to make it easy for anyone to attach/detach the nozzle kit without extruder disassembly, even if an extruder replacement is required.
As it is self-replaceable without waiting for customer service, it reduces maintenance costs and allows output without time-consuming.
The Cubicon Style NEO has applied a cable bear with industrial facility specifications to prevent free movement and twisting between cables.
Also, by applying a belt idler, which is an essential part of a large 3D printer, maintains consistent belt tension for a long time to ensure high-quality 3D printing.
The Cubicon Style NEO uses the power failure compensation feature to prevent data damage and output errors that may occur in the event of a power outage or accidental work stop. (the power requires to be recovered in 5 minutes)
As the MCU Board always monitors the nozzle position, it can continue high-quality output even after the power disconnecting of the 3D printer.
* Depending on the material or model, it may be difficult to resume the output due to the lifting caused by floor shrinkage.
| Parameter name | Value |
|---|---|
|
Technology
|
“FDM |
|
Build Volume (XYZ)
|
220 x 220 x 220 mm |
|
Accuracy
|
Z: ±0.2 mm + 1 layer |
|
Layer Thickness
|
0.1 ~ 0.3 mm |
|
Light Source
|
/ |
|
Nozzle Size
|
0.4 mm |
|
Printing Speed (Maximum)
|
Up to 150 mm/s |
|
Input Format
|
.stl, .obj, .3mf |
|
Material Catridge
|
/ |
|
Build Platform
|
Metal bed coated with special chemical layer (improves adhesion) |
|
Material
|
PLA+, PLA-i21, ABS, ABS-A100, PETG, TPU filaments |
|
Printing Software
|
Cubicreator, Cura for Cubicon” |
