Cubicon Style NEO A31C
114.000.000 ₫
2 in stock
With the built-in camera inside the Cubicon Style NEO, you can check the output process not only on the touchscreen at the front but also on your computer or smartphone. Also, if an output error or failure is identified, the output situation can be controlled through network remote control. (power stop and restart, etc.)
The flatness of the bed on which the build is printed and the spacing between nozzles are important factors in determining the quality of the output.
Style NEO delivers Auto-Leveling with the error precision within 10μm by applying the industrial load cell, it reduces height error failures during printing and provides the user with the best-in-class output quality.
The heating bed of CUBICON Style NEO is specially coated to allow the output to start immediately without separate adhesive or masking tape, as well as to be easily separated after the output, providing the best output quality.
It’s guaranteed. Besides, thermal efficiency was improved by applying insulation to the bottom of the heating bed.
| Parameter name | Value |
|---|---|
|
Technology
|
FDM |
|
Build Volume (XYZ)
|
310 x 310 x 310 mm |
|
Accuracy
|
Z: ±0.2 mm + 1 layer |
|
Layer Thickness
|
0.1 ~ 0.3 mm |
|
Light Source
|
/ |
|
Nozzle Size
|
0.4 mm |
|
Printing Speed (Maximum)
|
Up to 150 mm/s |
|
Input Format
|
.stl, .obj, .3mf |
|
Material Catridge
|
/ |
|
Build Platform
|
Metal bed coated with special chemical layer (improves adhesion) |
|
Material
|
PLA+, PLA-i21, ABS, ABS-A100, PETG, TPU filaments |
|
Printing Software
|
Cubicreator, Cura for Cubicon |
