Stronger parts with less post-processing.
Print complex geometries with ease
Modix’s Generation 4 printers are capable of printing significantly much faster than before. Travel speed of up to 350 mm/s, and printing of up to 250 mm/s.
This higher print speed has been made possible thanks to strong NEMA 23 motors on the X axis instead of NEMA-17 motors. In addition, the weight has been reduced on the Y axis as the weight of one motor is split now into two independent ones, using the IDEX setup.
“IDEX” stands for independent dual extruder, where each extruder is independently controlled. Meaning, while the active extruder is printing, the second extruder is “parked” outside the printing area. Therefore, printing advanced models with
internal geometries is made possible more easily, by using water-soluble filament.
With IDEX Technology printing advanced models with internal geometries is made possible by using water-soluble filament.
| Parameter name | Value |
|---|---|
|
Technology
|
FDM |
|
Build Volume (XYZ)
|
600 x 600 x 600 mm |
|
Accuracy
|
Z: ±0.2 mm + 1 layer |
|
Layer Thickness
|
0.1 ~ 1.2 mm |
|
Light Source
|
/ |
|
Nozzle Size
|
0.4 ~ 1.6 mm |
|
Printing Speed (Maximum)
|
250 mm/s (depending on nozzle size and layer thickness) |
|
Input Format
|
.stl, .obj, .3mf, .stp |
|
Material Catridge
|
/ |
|
Build Platform
|
removable (Magnetic Bed) (Option) |
|
Material
|
PLA, ABS, PETG, PC, PA, TPU, TPE, PVA, HIPS, ESD |
|
Printing Software
|
CF/GF reinforced filaments |
